Removal & Installation
- Before servicing the vehicle, refer to the Precautions Section.
- Remove the lower nut, washer and insulator.
- Remove the upper bolt and washer.
- Remove the rear stabilizer bar.
- Remove the bolt and the stabilizer bar. Discard the bolts.
- To install, reverse the removal procedure. Torque the bracket bolts to 30 ft. lbs. (40 Nm); the link-to-bar nuts to 21 ft. lbs. (28 Nm); the link-to-frame bolts to 60 ft. lbs. (81 Nm).