E320 1999

Removal & Installation

Print

E-Class (210)



Activated Charcoal Filter
  1. Before servicing the vehicle, refer to the precautions.
  2.  
  3. Remove cover below instrument panel on passenger side.
  4.  
  5. Remove filter cover.
    NOTE
    Pay attention to markings on cover.

  6.  
  7. Pull out both activated charcoal filters.
    WARNING
    Activated charcoal filters must not be cleaned. Replace only.



    Click image to see an enlarged view

    Fig. Activated charcoal filter location-E-Class (210)

  8.  

To install:

  1. Installation is the reverse of removal.
  2.  

Dust Filter
  1. Before servicing the vehicle, refer to the precautions.
  2.  
  3. Open engine hood and raise to vertical position.
  4.  
  5. Open snap fastener.
  6.  
  7. Take out air filter housing.
  8.  
  9. Take dust filter out of dust filter housing and discard.

    Click image to see an enlarged view

    Fig. Dust filter location

  10.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo