Removal & Installation
2.8L, 3.2L, 3.6L (104) And 2.2L, 2.3L (111) Engines
- Before servicing the vehicle, refer to the Precautions section.
Remove or disconnect the following:
Negative battery cable
Support the front sub frame and remove mounting bolts. Lower the subframe to access the oil pan mounting bolts.
NOTEIt may be necessary to tap on the oil pan with a rubber mallet to dislodge it from the engine block.
- Remove the mounting bolts and the oil pan. Clean all gasket material from the sealing surfaces.
Install or connect the following:
Oil pan with a new gasket. Torque the M6 bolts to 88 inch lbs. (9 Nm). Torque the M8 bolts to 15 ft. lbs. (21 Nm). Torque the M10 bolts to 30 ft. lbs. (40 Nm).