ES300 1992-1997

Removal & Installation

Print

Specific to:

Lexus ES300 1992-1993

  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION
    Before servicing components near or affected by the SRS (air bag) system, read and observe all SRS Service Precautions. Refer to Supplemental Restraint System (SRS), in the Chassis Electrical section. Failure to observe all precautions may result in accidental airbag deployment, personal injury, or death.

  2.  
  3. Disconnect the negative battery cable and wait at least 3 minutes for the SRS memory to drain.
  4.  
  5. Remove the lower finish panel, safety pad No. 2, and air duct. Refer to Instrument Panel Removal & Installation in the Body Interior section.
  6.  
  7. Remove the No. 2 air duct.
  8.  
  9. Remove the air mix servomotor:
    1. Disconnect the connector.
    2.  
    3. Remove the 2 screws and the air mix servomotor.

      Click image to see an enlarged view

      Fig. Remove the air mix servomotor

    4.  

  10.  

To install:

  1. Installation is the reverse of removal.
  2.  

Specific to:

Lexus ES300 1994-1996

  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION
    Before servicing components near or affected by the SRS (air bag) system, read and observe all SRS Service Precautions. Refer to Supplemental Restraint System (SRS), in the Chassis Electrical section. Failure to observe all precautions may result in accidental airbag deployment, personal injury, or death.

  2.  
  3. Disconnect the negative battery cable and wait at least 3 minutes for the SRS memory to drain.
  4.  
  5. Remove the No. 2 safety pad and heater to register No. 2 .
  6.  
  7. Remove the air mix servomotor:
    1. Disconnect the connector.
    2.  
    3. Remove the 2 screws and the air mix servomotor.
    4.  
    5. Disconnect the control cable.

      Click image to see an enlarged view

      Fig. Remove the air mix servomotor

    6.  

  8.  

To install:

  1. Installation is the reverse of removal.
  2.  

Specific to:

Lexus ES300 1997-1999

  1. Before servicing the vehicle, refer to the Precautions Section.
    CAUTION
    Before servicing components near or affected by the SRS (air bag) system, read and observe all SRS Service Precautions. Refer to Supplemental Restraint System (SRS), in the Chassis Electrical section. Failure to observe all precautions may result in accidental airbag deployment, personal injury, or death.

  2.  
  3. Disconnect the negative battery cable and wait at least 3 minutes for the SRS memory to drain.
  4.  
  5. Remove the No. 1 instrument lower panel. Refer to Instrument Panel Removal & Installation in the Body Interior section.
  6.  
  7. Remove the left-hand instrument lower panel.
  8.  
  9. Remove the air mix servomotor:
    1. Disconnect the connector.
    2.  
    3. Remove the 3 screws and servomotor, then disconnect the control cable.

      Click image to see an enlarged view

      Fig. Remove the air mix servomotor

    4.  

  10.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo