ES300 1992-1997

Slave (Release) Cylinder

Print

Removal & Installation



  1. Raise and support the vehicle safely.
  2.  
  3. Disconnect the fluid line from the assembly. Use a container to catch any fluid. Dispose of the fluid properly.

    Click image to see an enlarged view

    Fig. Using SST (SST 09751-36011) to disconnect the tube-1990-1991 models



    Click image to see an enlarged view

    Fig. Using SST (SST 09023-00100) to disconnect the tube-1992-93 models

  4.  
  5. Remove the two bolts and pull out release cylinder

    Click image to see an enlarged view

    Fig. Slave cylinder with the mounting bolts

  6.  

To install:

  1. Install the slave cylinder and tighten the bolts to 9 ft. lbs. (13 Nm).
  2.  
  3. Connect the tube line and tighten the bolt to 11 ft. lbs. (15 Nm).
  4.  
  5. Fill the clutch reservoir, bleed the clutch system, safely lower the vehicle, and check for leaks.
  6.  

 
label.common.footer.alt.autozoneLogo