ES300 1992-1997

Ignition Coil Module

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the V-bank cover, as applicable.
  4.  
  5. Disconnect the high-tension cords from ignition coils, as applicable.
  6.  
  7. Disconnect the connectors from the ignition coil.
  8.  
  9. Remove the bolts and ignition coils from the cylinder head. Arrange the ignition coils in correct order.

    Click image to see an enlarged view

    Fig. Remove the bolts and the ignition coils

  10.  

To install:

  1. Installation is the reverse of removal. Tighten the bolts to 69 inch lbs. (8 Nm).
  2.  

 
label.common.footer.alt.autozoneLogo