ES300 1992-1997

Air Intake System

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Disconnect the air flow meter connector and clamp.
  4.  
  5. Disconnect the air hose from air cleaner cap.
  6.  
  7. Disconnect the accelerator cable clamp, if applicable.
  8.  
  9. Disconnect the PCV hose and other applicable hoses and valves.
  10.  
  11. Loosen the air cleaner hose clamp bolt.
  12.  
  13. Disconnect the four air cleaner cap clips.
  14.  
  15. Disconnect the air cleaner hose from the throttle body, and remove the air cleaner cap together with the air flow meter and air cleaner hose.
  16.  
  17. Remove the air cleaner.
  18.  
  19. Remove the three bolts and air cleaner case.

    Click image to see an enlarged view

    Fig. Remove air cleaner

  20.  

To install:

  1. Installation is the reverse of removal.
  2.  

 
label.common.footer.alt.autozoneLogo