ES300 1992-1997

Crankshaft Front Seal

Print

Removal & Installation



  1. Remove the oil pump, or if the oil pump is still installed on the cylinder bock, use a knife to cut off the oil seal lip.
  2.  
  3. Using a screwdriver, pry out the oil seal.

    Click image to see an enlarged view

    Fig. Oil seal removal-oil pump removed-1994 models, other years similar



    Click image to see an enlarged view

    Fig. Oil seal removal-oil pump installed-1994 models, other years similar

  4.  

To install:

  1. Apply MP grease to a new oil seal lip.
  2.  
  3. Using SST (SST 09309-37010) or equivalent tool, and a hammer, tap in a new oil seal until its surface is flush with the oil pump case edge.
  4.  
  5. Apply MP grease to the oil seal lip.

    Click image to see an enlarged view

    Fig. Tap in a new oil seal-oil pump removed-1994 models, other years similar



    Click image to see an enlarged view

    Fig. Tap in a new oil seal-oil pump installed-1994 models, other years similar

  6.  

 
label.common.footer.alt.autozoneLogo