ES300 1992-1997

Flywheel or Flexplate

Print

Removal & Installation



  1. Remove the transaxle from the engine.

    Click image to see an enlarged view

    Fig. Remove the drive plate-1990-91 models



    Click image to see an enlarged view

    Fig. Remove the drive plate

  2.  

To install:

  1. Apply adhesive to 2 or 3 threads of the bolt end.
  2.  
  3. Install the front spacer, drive plate and rear plate on the crankshaft.
  4.  
  5. Install and uniformly tighten the 8 bolts in several passes, in the sequence shown. Tighten to 61 ft. lbs. (83 Nm).

    Click image to see an enlarged view

    Fig. Drive plate/flywheel bolt tightening sequence-1992-93 models



    Click image to see an enlarged view

    Fig. Drive plate bolt tightening sequence-1994-99 models

  6.  
  7. Install the transaxle.
  8.  

 
label.common.footer.alt.autozoneLogo