ES300 1992-1997

Engine Oil & Filter

Print

Oil & Filter Change



  1. Remove the oil filler cap.
  2.  
  3. Remove the oil drain plug, and drain the oil into a container.
  4.  
  5. Using (SST 09228-07500) or equivalent, remove the oil filter.
  6.  
  7. Check and clean the oil filter installation surface.
  8.  
  9. Apply clean engine oil to the gasket of a new oil filter.
  10.  
  11. Lightly screw the oil filter into place, and tighten it until the gasket contacts the seat.
  12.  
  13. Using (SST 09228-07500) or equivalent, tighten it an additional 3 / 4 turn.
  14.  
  15. Clean and install the oil drain plug with a new gasket. Tighten to 33 ft. lbs. 45 Nm).
  16.  
  17. Fill with fresh engine oil.
  18.  
  19. Install the oil filler cap.
  20.  
  21. Start engine and check for oil leaks.
  22.  
  23. Recheck engine oil level.
  24.  

 
label.common.footer.alt.autozoneLogo