Honda CRV/Odyssey 1995-2000 Repair Information

Timing Belt Cover and Seal

Print

REMOVAL & INSTALLATION



Upper Timing Belt Cover/Seal
  1. Note the radio security code and disconnect the negative battery cable.
  2.  
  3. Remove the valve cover.
  4.  
  5. Remove the upper timing belt cover.
  6.  
  7. Remove the seal from the groove in the cover.
  8.  

To install:
  1. Secure the seal in the cover. It may be helpful to use a semi drying gasket sealant to hold the seal in place.
  2.  
  3. The remainder of the installation procedure is the reverse of the removal procedure.
  4.  
  5. Enter the radio security code.
  6.  

Lower Timing Belt Cover/Seal

  1. Note the radio security code and disconnect the negative battery cable.
  2.  
  3. Remove the accessory drive belts. For specific details, refer to the drive belt procedures in General Information and Maintenance .
  4.  
  5. Remove the crankshaft pulley. For specific details, refer to the removal and installation procedure in this section.
  6.  
  7. Remove the lower timing belt cover.
  8.  
  9. Remove the seal from the groove in the cover.
  10.  

To install:
  1. Secure the seal in the cover. It may be helpful to use a semi drying gasket sealant to hold the seal in place.
  2.  
  3. The remainder of the installation procedure is the reverse of the removal procedure.
  4.  
  5. For specific details pertaining to the crankshaft pulley removal, refer to the removal and installation procedure in this section. For specific detail on drive belt installation, refer to the procedures in General Information and Maintenance .
  6.  
  7. Enter the radio security code.
  8.  

 
label.common.footer.alt.autozoneLogo