Envoy, Rainer, Trailblazer 2006-2007

Control Panel

Print

Removal & Installation



  1. Using a flat bladed tool, carefully pry out on the top of the HVAC control-auxiliary.
  2.  
  3. Remove the HVAC control-auxiliary from the center console/seat.
  4.  
  5. Disconnect the electrical connector.
  6.  
  7. Remove the HVAC control-auxiliary.
  8.  

To install:

  1. Connect the HVAC control-auxiliary electrical connector.
  2.  
  3. Install the HVAC control-auxiliary in the console bottom first.
  4.  
  5. Push in at the top of the HVAC control-auxiliary in order to engage the HVAC control-auxiliary in the console/seat.
  6.  

 
label.common.footer.alt.autozoneLogo