Envoy, Rainer, Trailblazer 2006-2007

Removal & Installation

Print

  1. Remove the floor console.
  2.  
  3. Rotate the console.
  4.  
  5. Remove the screw from the air outlet duct.
  6.  
  7. Remove the air outlet duct from the floor console.
  8.  
  9. Remove the rear mode actuator retaining screws.
  10.  
  11. Disconnect the electrical connector.
  12.  
  13. Remove the rear mode actuator.
  14.  

To install:

  1. Install the mode actuator.
  2.  
  3. Connect the electrical connector.
  4.  
  5. Install the screws to the mode actuator. Tighten the screws to 17 inch lbs. (1.9 Nm).
  6.  
  7. Install the air outlet duct to the console.
  8.  
  9. Install the screw to the air outlet duct. Tighten the screws to 17 inch lbs. (1.9 Nm).
  10.  
  11. Install the console.
  12.  

 
label.common.footer.alt.autozoneLogo