Envoy, Rainer, Trailblazer 2006-2007

Removal & Installation

Print

  1. Remove the right closeout/insulator panel.
  2.  
  3. Remove the I/P storage compartment door.
  4.  
  5. Disconnect the blower motor electrical connector.
  6.  
  7. Remove the blower motor mounting screws.
  8.  
  9. Remove the blower motor cooling tube.
  10.  
  11. Remove the blower motor.
  12.  

To install:

  1. Install the blower motor.
  2.  
  3. Install the blower motor cooling tube.
  4.  
  5. Install the blower motor mounting screws and tighten to 18 inch lbs. (2 Nm).
  6.  
  7. Connect the blower motor electrical connector.
  8.  
  9. Install the right closeout/insulator panel.
  10.  

 
label.common.footer.alt.autozoneLogo