Equinox 2005-2007, Torrent 2006-07

Control Valve

Print

Removal & Installation



The Brake Pressure Modulator Valve is located below the control module.

  1. Remove the electronic brake control module.
  2.  
  3. Remove the brake pressure modulator valve.
  4.  
  5. Installation is the reverse order of removal.
  6.  
  7. Turn the ignition switch to the ON position. DO NOT start the engine.
  8.  
  9. Perform a Diagnostic System Check to check for any DTCs.
  10.  

 
label.common.footer.alt.autozoneLogo