Equinox 2005-2007, Torrent 2006-07

Wheel Speed Sensors

Print

Removal & Installation



Front
  1. Raise and support the vehicle.
  2.  
  3. Remove the tire and wheel assembly.
  4.  
  5. Remove the brake rotor.
  6.  
  7. Disconnect the wheel speed sensor electrical connector.
  8.  
  9. Remove the wheel speed sensor bolt.
  10.  
  11. Remove the wheel speed sensor.
  12.  

To install:

  1. Install the wheel speed sensor to the wheel bearing/hub assembly.
  2.  
  3. Install the wheel speed sensor mounting bolt and tighten to 71 inch lbs. (8 Nm).
  4.  
  5. Connect the wheel speed sensor electrical connector.
  6.  
  7. Install the brake rotor.
  8.  
  9. Install the tire and wheel assembly.
  10.  
  11. Lower the vehicle.
  12.  

Rear
  1. Raise and support the vehicle.
  2.  
  3. Remove the tire and wheel assembly.
  4.  
  5. Remove the brake shoes.
  6.  
  7. Disconnect the wheel speed sensor electrical connector.
  8.  
  9. Remove the wheel speed sensor bolt.
  10.  
  11. Remove the wheel speed sensor through the backing plate.
  12.  

To install:

  1. Install the wheel speed sensor through the drum brake backing plate to the wheel bearing/hub assembly.
  2.  
  3. Seat the wheel speed sensor harness grommet into the backing plate.
  4.  
  5. Install the wheel speed sensor mounting bolt and tighten to 71 inch lbs. (8 Nm).
  6.  
  7. Connect the wheel speed sensor electrical connector.
  8.  
  9. Install the brake shoes.
  10.  
  11. Install the tire and wheel assembly.
  12.  
  13. Lower the vehicle.
  14.  

 
label.common.footer.alt.autozoneLogo