Equinox 2005-2007, Torrent 2006-07

Ignition Coil Module

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the engine appearance cover.
  4.  
  5. Disconnect the spark plug wires. Note the position from which the wires are removed.
  6.  
  7. Disconnect the ignition coil/control module electrical connectors.
  8.  
  9. Remove the 4 bolts securing the ignition coil/control module to the ignition control module bracket.
  10.  
  11. Remove the ignition coil/control module.
  12.  

To install:

  1. Install the ignition coil/control module to the ignition control module bracket.
  2.  
  3. Install the 4 bolts securing the ignition coil/control module to the ignition control module bracket and tighten to 40 inch lbs. (4.5 Nm).
  4.  
  5. Connect the ignition coil/control module electrical connectors.
  6.  
  7. Connect the spark plug wires.
  8.  
  9. Install the engine appearance cover.
  10.  
  11. Connect the negative battery cable.
  12.  

 
label.common.footer.alt.autozoneLogo