Equinox 2005-2007, Torrent 2006-07

Starter

Print

Removal & Installation



  1. Disconnect the battery negative cable from the battery.
  2.  
  3. Raise and suitably support the vehicle.
  4.  
  5. Remove the starter motor solenoid positive terminal nut and electrical wires.
  6.  
  7. Remove the starter motor solenoid S terminal nut and electrical wire.
  8.  
  9. Remove the torque converter cover bolt and cover.
  10.  
  11. Remove the starter motor bolts and the starter.

    Click image to see an enlarged view

    Fig. Remove the starter mounting bolts (2, 3) to remove the starter (1)-2007 Torrent shown, others similar

  12.  

To install:

  1. Install the starter motor.
  2.  
  3. Install the starter motor bolts and tighten to 32 ft. lbs. (43 Nm).
  4.  
  5. Install the torque converter cover and bolt.
  6.  
  7. Install the starter motor solenoid S terminal electrical wire and nut.
  8.  
  9. Install the starter motor solenoid positive terminal electrical wires and nut.
  10.  
  11. Lower the vehicle.
  12.  
  13. Install the battery negative cable to the battery.
  14.  

 
label.common.footer.alt.autozoneLogo