Escalade, Suburban 1500 & 2500, Tahoe, Yukon, Yukon XL 1500 & 2500 (2006-2007), Yukon Denali and Yukon Denali XL (2005-2006)

Coil Springs

Print

Removal & Installation



  1. Raise and support the vehicle.
  2.  
  3. Disconnect the Real Time Damping (RTD) sensor, if equipped.
  4.  
  5. Remove the lower shock absorber nuts and bolt from the rear axle.
  6.  
  7. Lower the rear axle until the springs are fully unloaded.

    Click image to see an enlarged view

    Fig. Rear coil spring removal-1500 series

  8.  
  9. Remove the spring and the upper and lower insulators.
  10.  

To install:

  1. Position the spring and the upper and lower insulators.
  2.  
  3. Install the rear spring to the rear axle.
  4.  
  5. Raise the rear axle. Install the lower shock absorber nuts to the rear axle.
  6.  
  7. Connect the RTD sensor, if equipped.
  8.  
  9. Remove the rear axle support. Lower the vehicle.
  10.  

 
label.common.footer.alt.autozoneLogo