Removal & Installation
- Before servicing the vehicle, refer to the Precautions Section.
Remove the windshield wiper mounting arm and pivot shaft
WARNINGDo not remove the wiper motor linkage arm from the wiper motor assembly. If the arm is removed, the wiper arms may not park in the correct location.
NOTEUse a suitable tool to separate the wiper linkage arm from the wiper mounting arm and pivot shaft assembly.
Remove the 3 bolts and the wiper motor.
- Install wiper motor and bolts.
- Tighten wiper motor bolts to 10 ft. lbs. (13 Nm).
- Install windshield wiper mounting arm and pivot shaft.
- Check wiper operation.