Expedition, Navigator 2006-2007

Blend Door Actuator

Print

Removal & Installation



Air Distribution
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the RH quarter trim panel cup holder and access panel.
  4.  
  5. Remove the screws.
  6.  
  7. Disconnect the blend door actuator electrical connector.
  8.  
  9. Installation is the reverse of the removal procedure.
  10.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Fold the third row seats fully forward.
  4.  
  5. Remove the RH D-pillar trim panel.
  6.  
  7. Remove the lift gate sill plate.
  8.  
  9. Remove the rear floor cargo space trim panel
  10.  
  11. Position the rear floor cargo space floor trim aside and remove the RH rear quarter trim panel bolt.
  12.  
  13. Remove the RH quarter trim panel utility tray.
  14.  
  15. Detach the 3 rear and 5 upper RH quarter trim panel clips and position the quarter trim panel aside
  16.  
  17. Disconnect the auxiliary mode door actuator electrical connector.
  18.  
  19. Remove the 2 auxiliary mode door actuator screws.
  20.  
  21. Remove the auxiliary mode door actuator.
  22.  
  23. To install, reverse the removal procedure.
  24.  

Temperature
  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Remove the RH quarter trim panel.
  4.  
  5. Remove the auxiliary temperature blend door actuator.
  6.  
  7. Disconnect the temperature blend door actuator electrical connector.
  8.  
  9. Remove the screws.
  10.  
  11. Remove the auxiliary temperature blend door actuator.
  12.  
  13. Installation is the reverse of the removal procedure.
  14.  

  1. Before servicing the vehicle, refer to the precautions section.
  2.  
  3. Fold the third row seats fully forward.
  4.  
  5. Remove the RH D-pillar trim panel.
  6.  
  7. Remove the lift gate sill plate.
  8.  
  9. Remove the rear floor cargo space trim panel
  10.  
  11. Position the rear floor cargo space floor trim aside and remove the RH rear quarter trim panel bolt.
  12.  
  13. Remove the RH quarter trim panel utility tray.
  14.  
  15. Detach the 3 rear and 5 upper RH quarter trim panel clips and position the quarter trim panel aside
  16.  
  17. Disconnect the auxiliary temperature blend door actuator electrical connector.
  18.  
  19. Remove the 2 auxiliary temperature blend door actuator screws.
  20.  
  21. Remove the auxiliary temperature blend door actuator.
  22.  
  23. To install, reverse the removal procedure.

    Click image to see an enlarged view

    Fig. Expedition EL and Navigator L Auxiliary Temperature Blend Door actuator

  24.  

 
AutoZone Logo