Express, Savana, G1500, G2500, G3500, 1998-2005

Removal & Installation

Print

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument cluster trim plate.
  4.  
  5. Loosen the control panel screw from the left side of the panel and slide the panel forward to gain access to the components at the rear of the unit.
  6.  
  7. Disengage the electrical connections.
  8.  
  9. Disconnect the vacuum harnesses as necessary.
  10.  
  11. Remove the control assembly.

    Click image to see an enlarged view

    Fig. Typical control panel



    Click image to see an enlarged view

    Fig. Vacuum lines to control panel connection

  12.  

To install:

  1. Install the control assembly.
  2.  
  3. Connect the vacuum harnesses, if removed.
  4.  
  5. Engage the electrical connections.
  6.  
  7. Install the control panel screw.
  8.  
  9. Install the instrument cluster trim plate. Connect the negative battery cable.
  10.  

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the instrument cluster trim plate.
  4.  
  5. Loosen the control panel screw from the left side of the panel and slide the panel forward to gain access to the components at the rear of the unit.
  6.  
  7. Disengage the electrical connections.
  8.  
  9. Disconnect the vacuum harnesses as necessary.
  10.  
  11. Remove the control assembly.

    Click image to see an enlarged view

    Fig. Pivot the control panel then release the vacuum and electrical connections-Express and Savana



    Click image to see an enlarged view

    Fig. Vacuum lines to control panel connection

  12.  

To install:

  1. Install the control assembly.
  2.  
  3. Connect the vacuum harnesses, if removed.
  4.  
  5. Engage the electrical connections.
  6.  
  7. Install the control panel screw.
  8.  
  9. Install the instrument cluster trim plate. Connect the negative battery cable.
  10.  

 
label.common.footer.alt.autozoneLogo