F-Series Trucks 2007, Mark LT 2007
Stabilizer Bar (Sway Bar) & Links
Removal & Installation
Before servicing the vehicle, refer to the Precautions Section.
Raise and safely support the vehicle.
Remove the nuts from both lower ends of the stabilizer bar links and remove the washers.
Remove the nuts and washers from both upper ends of the stabilizer bar links-to-frame and remove the links.
Remove the nuts from both stabilizer bar retainer-to-axle brackets and remove the stabilizer bar retainers, stabilizer bar mounting brackets, U-bolts and the stabilizer bar.
To install, reverse the removal procedure, using new fasteners. Observe the following torques:
Bracket U-bolt nuts: 30 ft. lbs. (40 Nm)
End links top and bottom: 52 ft. lbs. (70 Nm)