Five Hundred, Montego 2006-2007
Hydraulic Control Module
Removal & Installation
With the vehicle in NEUTRAL, position it on a hoist.
Disconnect the anti-lock brake system (ABS) electrical connector.
Brake lines must be installed in the same location as removed.
Loosen the brake line-to-hydraulic control unit (HCU) fittings and position the brake lines aside.
Remove the 2 bracket-to-HCU bolts and the HCU.
To install, reverse the removal procedure and tighten the HCU bolts to 71 inch lbs. (8 Nm).
Bleed the brake system.