Five Hundred, Montego 2006-2007

Removal & Installation

Print

Left Side




NOTE
The LH temperature blend door actuator can be accessed from below the LH side of the instrument panel.

  1. Remove the 3 LH temperature blend door actuator screws.
  2.  
  3. Disconnect the LH temperature blend door actuator.
  4.  
  5. Remove the LH temperature blend door actuator.
  6.  
  7. To install, reverse the removal procedure.
  8.  

Right Side



  1. Lower the glove compartment.
  2.  
  3. Remove the 3 RH temperature blend door actuator screws.
  4.  
  5. Disconnect the RH temperature blend door actuator electrical connector.
  6.  
  7. Remove the RH temperature blend door actuator.
  8.  
  9. To install, reverse the removal procedure.
  10.  

 
AutoZone Logo