Removal & Installation
2.0L (VIN N) & 2.3L (VIN Z) Engines
Before servicing the vehicle, refer to the Precautions Section.
NOTEThe crankshaft, crankshaft sprocket and the pulley are fitted together by friction, using diamond washers between the flange faces on each part. For that reason, the crankshaft sprocket is also unfastened if you loosen the pulley. Therefore, the engine must be retimed each time the damper is removed.
- Remove the crankshaft pulley. See -Crankshaft Damper- in this section.
Remove the crankshaft seal using Special Tool 303-409.