REMOVAL & INSTALLATION
All Contour and Mystique models are equipped with four speakers, one in each door.Door Speakers
See Figures 1, 2 and 3
- Disconnect the negative battery cable.
- Remove the door trim panel.
- Remove the three screws attaching the speaker to the door panel.
- Lift the speaker from the door panel and disconnect the electrical harness.
- Remove the speaker.
- Connect the electrical harness to the speaker.
- Place the speaker into the opening in the door panel.
- Tighten the attaching screws to 8 inch lbs. (0.9 Nm).
- Install the door trim panel.
- Connect the negative battery cable.