Removal & Installation
- Remove the valve cover.
Remove the rocker arm retaining bolt.
NOTERocker the arms should be installed in their original location during assembly.
- Remove the rocker arms. If more than 1 rocker arm is to be removed, identify each rocker arm location.
Rocker arms, seats and retaining bolts. Lubricate all rocker arm components with engine assembly lubricant. Tighten the bolts to 44 inch lbs. (5 Nm).
The rocker arm seats must be fully seated in the cylinder head and the pushrods must be seated in the rocker arm sockets prior to the final tightening.
Final tighten all rocker arm retaining bolts to 24 ft. lbs. (32 Nm)
- Install the valve cover.