Ford Freestar, Monterey 2004-2006

Fuel Pump Driver Module

Print

Removal & Installation





Click image to see an enlarged view

Fig. Exploded view of the fuel pump driver module electrical connector (1), mounting nuts (2) and fuel pump driver module (3)

  1. Remove the LH lower B-pillar trim panel.
  2.  
  3. Disconnect the fuel pump driver module electrical connector.
  4.  
  5. Remove the fuel pump driver module nuts, then remove the fuel pump driver module.
  6.  
  7. Installation is the reverse of the removal procedure. Tighten the fuel pump driver module nuts to 44 inch lbs. (5 Nm).
  8.  

 
label.common.footer.alt.autozoneLogo