Ford Freestar, Monterey 2004-2006

Ignition Switch

Print

Removal & Installation



  1. Disarm the Supplemental Restraint System (SRS), as outlined in Chassis Electrical.
  2.  
  3. Remove the steering column cover and reinforcement.
  4.  
  5. Disconnect the ignition switch electrical connector.
  6.  
  7. Remove the 2 ignition switch bolts, then remove the ignition switch.
  8.  
  9. Installation is the reverse of the removal procedure. Tighten the ignition switch screws to 53 inch lbs. (6 Nm).

    Click image to see an enlarged view

    Fig. View of the ignition switch electrical connector (1), ignition switch bolts (2) and ignition switch (3)

  10.  

 
label.common.footer.alt.autozoneLogo