Ford Freestar, Monterey 2004-2006

Removal & Installation

Print

  1. Disarm the Supplemental Restraint System (SRS), as outlined in Chassis Electrical.
    NOTE
    If warped or damaged, the access cover can be serviced separately. It is not necessary to install a new steering wheel shroud.

  2.  
  3. Remove the steering wheel access cover.
  4.  
  5. Disconnect the electrical connectors.
  6.  
  7. Remove the steering wheel bolt gear drive.
  8.  
  9. Remove the steering wheel.
  10.  

To install:

  1. Install the steering wheel and tighten the bolt to 13 ft. lbs. (18 Nm).
  2.  
  3. Attach the electrical connectors.
  4.  
  5. Install the steering wheel access cover.
  6.  
  7. Arm the Supplemental Restraint System (SRS), as outlined in Chassis Electrical.
  8.  

 
label.common.footer.alt.autozoneLogo