See Figures 1 through 5
REMOVAL & INSTALLATION
See Figures 6, 7 and 8
The trunk lid can be removed by removing the hinge-to-trunk lid bolts and sliding the trunk lid off of the hinges. The gas struts used to support the trunk lid must be removed with the lid in the fully open position.
On most applications, it is useful to matchmark the hinges to the lid before loosening any fasteners. This can significantly reduce the amount of time and effort necessary to adjust the hood during re-installation.
Fore-aft fit may be adjusted by loosening the hinge-to-lid bolts and positioning the lid as necessary.
Vertical fit can be adjusted by adding or deleting shims located between the the hinges and trunk lid.