REMOVAL & INSTALLATION
See Figures 1 and 2
Raise the blade end of the arm off of the windshield and move the slide latch away from the pivot shaft. This will unlock the wiper arm from the pivot shaft and hold the blade end of the arm off of the glass at the same time. The wiper arm can now be pulled off of the pivot shaft without the aid of any tools.
When installing the wiper arm, the arm must be positioned properly. There is a measurement which can be made to determine the proper blade positioning. With the wiper motor in the PARK position, install the arm so that the distance between the blade-to-arm saddle and the lower windshield molding is as shown in FIG. 35.