Ford Mustang 1994-1998 Repair Guide

Hairpin Clip Fitting



See Figure 1

  1. Clean all dirt and grease from the fitting. Spread the two clip legs about 1 / 8 in. (3mm) each to disengage from the fitting and pull the clip outward from the fitting. Use finger pressure only; do not use any tools.
  3. Grasp the fitting and hose assembly and pull away from the steel line. Twist the fitting and hose assembly slightly while pulling, if the assembly sticks.

Click image to see an enlarged view

Fig. Fig. 1: When disconnecting fuel lines equipped with hairpin clips, always install new clips into the fitting prior to reattachment

  1. Inspect the hairpin clip for damage, and replace the clip if necessary. Reinstall the clip in position on the fitting.
  3. Inspect the fitting and inside of the connector to ensure freedom from dirt or obstruction. Install the fitting into the connector and push together. A click will be heard when the hairpin snaps into the proper connection. Pull on the line to ensure full engagement.