REMOVAL & INSTALLATION
See Figure 1
- Raise and safely support the rear end on jackstands.
- Remove and discard the four stabilizer bar-to-lower control arm bolts.
- Remove the stabilizer bar.
- Installation is the reverse of removal. Torque the new bolts to 20 ft. lbs. (27 Nm) on 1979-81 cars; 45-50 ft. lbs. (61-67 Nm) on 1982-88 cars.
Be careful not to install the stabilizer bar upside down. A color code may be provided on the passenger side of the bar, as an aid for proper orientation.