See Figure 1
Fig. Fig. 1: A fuse may be carefully removed with your fingers or by using a fuse puller tool
The fuse block is located on the left side of the vehicle, beneath either end of the instrument panel. The circuit each fuse protects is indicated on the fuse block.
A glass cartridge type fuse is used on all of these models. The amperage rating is on the metal end of the fuse along with a stamping on the block.
When you are replacing a blown fuse be sure to use only the specified fuse for that particular circuit. If one is not available only temporarily use one from another circuit that is not necessary to keep the vehicle running. For example a clock, radio or cigar lighter fuse is a good idea. Never use a fuse higher than specified, damage to the wiring circuit could occur.