REMOVAL & INSTALLATION
See Figures 1, 2 and 3
The parking lights are located in the lower panel of the bumper. It is not necessary to remove the light body to replace the bulb. Just unscrew the lens and pull the bulb out. To remove the light body, remove the body-to-panel retaining nuts. Disconnect the wiring leading to the lamp and pull the unit from the vehicle. Install the component in the reverse order of removal.
The front parking lights are mounted in the openings in the bumper lower panel. To replace the bulb, remove the door and lens from the front. To remove the light body, disengage the lead wire locator, then disconnect the wire at the connector plug. Remove the mounting nuts and slide the assembly from under the bumper.