Ford Pick-ups and Broncos 1987-1996 Repair Guide
Manual Locking Hubs
REMOVAL & INSTALLATION
To remove hub, first separate cap assembly from body assembly by removing the six (6) socket head capscrews from the cap assembly and slip apart.
Remove snapring (retainer ring) from the end of the axle shaft.
Remove the lock ring seated in the groove of the wheel hub. The body assembly will now slide out of the wheel hub. If necessary, use an appropriate puller to remove the body assembly.
Install hub in reverse order of removal. Torque socket head capscrews to 30-50 inch lbs. (3.4-5.64 Nm).