Ford Probe 1989-1992 Repair Guide
Electric Cooling Fan
REMOVAL & INSTALLATION
Disconnect the negative battery cable.
Disconnect the cooling fan electrical connectors.
Remove the fan shroud-to-radiator screws and the fan/shroud assembly.
If removing the fan motor from the shroud, remove the fan blade-to-motor nut and washer, the fan motor-to-shroud bolts and the motor.
Installation is the reverse of the removal procedure. Tighten the cooling fan blade attaching nut to 69-95 inch lbs. (8-11 Nm), the motor-to-shroud screws to 23-46 inch lbs. (6-5.2 Nm) and the shroud-to-radiator screws to 61-87 inch lbs. (7-10 Nm).