REMOVAL & INSTALLATION
Disconnect the negative battery cable.
Remove the steering wheel. Refer to
Remove the center cover mounting screws and the cover.
Remove cluster module mounting screws, pull the cluster module away from the dash and disconnect the electrical connectors. Remove the cluster module.
Remove the turn signal lever-to-turn signal switch screw and the lever.
From the rear of the instrument cluster module, remove the turn signal switch screws and the switch.
Installation is the reverse of the removal procedure. Check turn signal switch operation.
Fig. Fig.1Cluster module removal and installation
Fig. Fig. 2 Turn signal arm removal and installation
Fig. Fig. 3 Turn signal switch removal and installation