Ford Ranger 2000-2005

Wheel Cylinders

Print

Removal & Installation



  1. Before servicing the vehicle, please familiarize yourself with safety procedures.
  2.  
  3. Remove the brake shoes and linings.
  4.  
  5. Disconnect the brake line fitting.
  6.  
  7. Remove the two rear wheel cylinder bolts and remove the rear wheel cylinder.
  8.  

To install:

  1. Installation is the reverse of the removal procedure.
  2.  
  3. Observe the following tightening torques:

    Wheel cylinder bolts to 11 ft. lbs. (15 Nm)
     
    Brake line fitting to 13 ft. lbs. (18 Nm).
     

  4.  
  5. Bleed the brake system.
  6.  

 
AutoZone Logo