Ford Ranger/Bronco II 1983-1990 Repair Guide

Circuit Breakers


See Figure 1

These models use circuit breakers for components which have a high start-up amperage pull (such as power windows). All breakers will automatically reset if they have been tripped. The circuit breakers are replaceable (should one go bad or not reset) and can be found on the fuse panel.

Click image to see an enlarged view

Fig. Fig. 1: Circuit breakers can be replaced as if it were a fuse, simply grasp hold of it and pull it from the panel


The circuit breakers are replaced in the same manner as a fuse. Simply pull the breaker from the fuse panel to remove.