Log In
Search suggestions

    My Vehicles

    2013 Mercedes Benz E350 4MATIC 3.5L DI DOHC 6cyl

    My Store

    1720 S RIDGEWOOD A
    (386) 427-1210

    CLOSED Open tomorrow at 9:00 AM

    GET A $25 GIFT CARD FOR EVERY $100 SPENT ON ONLINE SHIP-TO-HOME ORDERS.

    Use Code: GIVETHANKS

    See Details

    Ford Ranger/Bronco II 1983-1990 Repair Guide

    Door Locks

    Print

    REMOVAL & INSTALLATION



    Door Latch

    See Figure 1



    Click image to see an enlarged view

    Fig. Fig. 1: Door latch assembly-Ranger and Bronco II

    1. Remove the door trim panel and watershield.
    2.  
    3. Disconnect the rods from the handle and lock cylinder, and from the remote control assembly.
    4.  
    5. Remove the latch assembly attaching screws and remove the latch from the door.
    6.  
    7. Installation is the reverse of removal.
    8.  

    Door Lock Cylinder
    1. Open the window.
    2.  
    3. Remove the trim panel and watershield.
    4.  
    5. Disconnect the actuating rod from the lock control link clip.
    6.  
    7. Slide the retainer away from the lock cylinder.
    8.  
    9. Remove the cylinder from the door.
    10.  
    11. Use a new gasket when installing to ensure a watertight fit.
    12.  
    13. Lubricate the cylinder with suitable oil recommended for this application.
    14.  

     
    AutoZone Logo