Ford Ranger/Explorer/Mountaineer 1991-1999

VACUUM DIAGRAMS

Print

Following are vacuum diagrams for most of the engine and emissions package combinations covered by this information. Because vacuum circuits will vary based on various engine and vehicle options, always refer first to the vehicle emission control information label, if present. Should the label be missing, or should vehicle be equipped with a different engine from the vehicle's original equipment, refer to the diagrams below for the same or similar configuration.

If you wish to obtain a replacement emissions label, most manufacturers make the labels available for purchase. The labels can usually be ordered from a local dealer.

See Figures 1 through 7





Click image to see an enlarged view

Fig. Fig. 1: Vacuum hose routing for all 1991-93 models and 1994 Ranger models

 


Click image to see an enlarged view

Fig. Fig. 2: Vacuum hose routing for 1994 Explorer models

 


Click image to see an enlarged view

Fig. Fig. 3: Vacuum hose routing for 1995-99 Ranger models with the 2.3L and 2.5L engine

 


Click image to see an enlarged view

Fig. Fig. 4: Vacuum hose routing for 1995-99 Ranger models with the 3.0L engine

 


Click image to see an enlarged view

Fig. Fig. 5: Vacuum hose routing for 1995-99 Ranger models with the 4.0L engine

 


Click image to see an enlarged view

Fig. Fig. 6: Vacuum hose routing for 1995-99 Explorer/Mountaineer models with the 4.0L engine

 


Click image to see an enlarged view

Fig. Fig. 7: Vacuum hose routing for 1996-99 Explorer/Mountaineer models with the 5.0L engine

 

 
AutoZone Logo