Log In
Search suggestions

    My Vehicles

    2011 Honda Truck CR-V EX 2WD 2.4L MFI DOHC 4cyl

    Find a Store

    Select Store

    SAVE 20% + GET A $20 GIFT CARD ON ONLINE SHIP-TO-HOME ORDERS OVER $100.

    Use Code: BLKFRIDAY

    See Details

    Ford Taurus/Sable 1996-1999 Repair Guide

    Windshield Washer Reservoir

    Print

    REMOVAL & INSTALLATION



    See Figure 1



    Click image to see an enlarged view

    Fig. Fig. 1: Windshield washer reservoir mounting

    1. Disconnect the negative battery cable.
    2.  
    3. Remove the radiator recovery tank.
    4.  
    5. Detach washer pump electrical connector.
    6.  
    7. Remove the two nuts near the A/C accumulator retaining the reservoir to the body.
    8.  
    9. Raise and support the vehicle.
    10.  
    11. Working through the passenger side front wheel opening, remove the front half of the lower splash shield.
    12.  
    13. Remove the screw retaining reservoir to the inner fender.
    14.  
    15. Disconnect the washer pump hose and drain the washer solvent into a suitable container.
    16.  
    17. Remove the washer reservoir from the vehicle.
    18.  
    19. The installation is the reverse of the removal.
    20.  

     
    AutoZone Logo