See Figure 1
The fuse panel is located below and to the left of the steering column.
Fuses are a one-time circuit protection. If a circuit is overloaded or shorts, the fuse will blow thus protecting the circuit. A fuse will continue to blow until the circuit is repaired.
- Access the fuse panel from the left of the steering column.
- Locate the blown fuse and pull out. DO NOT TWIST.
- Take note of the ampre number written on the top of the fuse.
- Push a new fuse of the same ampre into the receptacle, making sure the contact is being made on both sides of the fuse.