REMOVAL & INSTALLATION
See Figures 1, 2, 3 and 4
Emblems are located on different areas of your vehicle. They can be mounted with a two sided tape or with clips that hold them in from behind. Either one is a simple job for one to do. The peel-off type of emblem is exactly that, you peel it from the outside of the vehicle, then apply new two sided tape to install it. The other type of emblems have two or more small clips which retaining them to the vehicle. These simply slip off. You may need to purchase new clips to install the emblem once removed. Sometimes the old clips become damaged during removal.
Moldings are usually held in by clips, screws, nuts or pushpins. Be careful not to pry at your moldings, this can cause the moldings to bend and become out of shape. Some moldings may use one or more of the types of retainers such as nuts and pushpins. Look at the item carefully before removing.