See Figure 1
Ford does not require the ball joints to be lubricated on these models.
TIE ROD ENDS
Apply a small amount of chassis grease to the tie rods ends and check for wear.
On models so equipped, apply a small amount of chassis grease to the pivot points of the clutch linkage.
AUTOMATIC TRANSMISSION LINKAGE
On models so equipped, apply a small amount of 10W engine oil to the kickdown and shift linkage at the pivot points.
PARKING BRAKE LINKAGE
At yearly intervals or whenever binding is noticeable in the parking brake linkage, lubricate the cable guides, levers and linkage with a suitable chassis grease.