REMOVAL & INSTALLATION
Fig. Fig. 1 Disconnect the speedometer cable by pressing the quick disconnect tab
Fig. Fig. 2 Exploded view of a common speedometer cable driven end
Fig. Fig. 3 Remove the hold-down screw at the speedometer cable driven end
Fig. Fig. 4 Remove the cable from the speedometer drive
Reach up behind the cluster and disconnect the cable by depressing the quick disconnect tab and pulling the cable away.
Remove the cable from the casing. If the cable is broken, raise the vehicle on a hoist and disconnect the cable from the transmission.
Remove the cable from the casing.
To remove the casing from the vehicle pull it through the floor pan.
To replace the cable, slide the new cable into the casing and connect it at the transmission.
Route the cable through the floor pan and position the grommet in its groove in the floor.
Push the cable onto the speedometer head.