Ford Vans 1961-1988 Repair Guides



Click image to see an enlarged view

Fig. Fig. 1 Connect the jumper cables to the batteries and engine in the order shown

NEVER hook the batteries up in a series circuit or the entire electrical system will go up in smoke, including the starter!

Whenever a vehicle is jump started, precautions must be followed in order to prevent the possibility of personal injury. Remember that batteries contain a small amount of explosive hydrogen gas which is a by-product of battery charging. Sparks should always be avoided when working around batteries, especially when attaching jumper cables. To minimize the possibility of accidental sparks, follow the procedure carefully.

Ford vans equipped with the 8-420 (6.9L) or 8-444 (7.3L) V8 diesel engine utilize two 12 volt batteries, one on either side of the engine compartment. The batteries are connected in a parallel circuit (positive terminal to positive terminal, negative terminal to negative terminal). Hooking the batteries up in parallel circuit increases battery cranking power without increasing total battery voltage output. Output remains at 12 volts. On the other hand, hooking two 12 volt batteries up in a series circuit (positive terminal to negative terminal, positive terminal to negative terminal) increases total battery output to 24 volts (12 volts plus 12 volts).